Chapter 2. Site Preparation And Installation - Datalogic Magellan 9500 Product Reference Manual

Product Reference Guide
Site Preparation and
This chapter provides a reference for preparing most checkstands to
receive the scanner or scanner/scale. Included are physical parameters and
instructions for checkstand preparation, power and ventilation consider-
ations, cable routing information and unit installation.
Site Preparation lists all procedures necessary to prepare the checkstand.
The instructions that follow, titled
the three models that are available (shown in
tate easy installation into almost any checkstand application around the
world:
Model 9501 — Scanner only
Some models are designed to fit with little or no modification into open-
ings cut for previously installed scanners such as Magellan
®
NCR scanner models 7820/24 and 7870. Other models are designed for
applications with smaller footprint requirements.
Once the procedures in this chapter are complete, the scanner is ready for
1
scanning operation ; with the exception that if a scanner/scale was
installed, calibration will be required before placing the unit into opera-
tion. You must consult the local weights and measures authority to ensure
that all legal requirements are met concerning calibration and certifica-
tion. ,
Chapter 5 Calibration
the scale in either pounds or kilograms.
1. Electronic Article Surveillance (EAS) operation requires the installation of the Sensormatic
TM
Max Pro antenna and controller.
Chapter 2
Installation
Checkstand Preparation
Figure 2-1
Model 9502 — Scanner/Scale
, contains detailed procedures for calibrating
, detail steps for
below) to facili-
®
scanners, or
®
Scan-
2-1