Scale Zero Push Button - Datalogic Magellan 9500 Product Reference Manual

Scale Zero Push Button

NOTE
Table A-4. Scale Zero Push Button Functions
PRESS
DURATION
Momentary Zero Scale
Scale Diagnostics
4 Seconds
Mode
8 Seconds Resets Scanner
a. Diagnostics Mode is meant for use by trained systems support personnel. Users should not need to ini-
tiate this function under normal circumstances.
Product Reference Guide
The Scale Zero Push Button is used for multiple functions as listed in
.
Table A-4
The Scale Zero Push Button has no function in a "scanner only"
model.
FUNCTION
When programmed to do so, the yellow LED should be lit when no
weight is on the scale, indicating scale at zero. If it is not, press the
switch to zero the scale. The unit will sound a "click" upon pressing
the button.
This mode allows system support personnel to troubleshoot prob-
lems with the scale. Momentarily press the Scale Zero Push Button
a
or cycle power to exit Scale Diagnostics Mode.
Only system support personnel
Controls and Indicators
COMMENT
A-9