I 2 Of 5 Aim Id - Datalogic Magellan 9500 Product Reference Manual

I 2 of 5 AIM ID

Product Reference Guide
This feature enables/disables transmission of the I 2 of 5 AIM symbology
identifier.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
Interleaved 2 of 5 (I 2 of 5) Enable
I 2 of 5 AIM ID = DISABLE
I 2 of 5 AIM ID = ENABLE
6-225