Single Cable Rs-232 Options; Single Cable Rs-232 Scanner Only Protocol - Datalogic Magellan 9500 Product Reference Manual

Single Cable RS-232 Scanner Only Protocol

Product Reference Guide
This sets the type of interface protocol that will be used in Single Cable
RS-232.
Options are:
• Scanner/scale RS-232 protocol
• Scanner only RS-232 protocol
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code below representing the desired option. You'll need
to cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
SINGLE CABLE RS-232 PROTOCOL = SCANNER/SCALE
SINGLE CABLE RS-232 PROTOCOL = SCANNER ONLY

Single Cable RS-232 Options

6-111