Standard 2 Of 5 Check Character Calculation - Datalogic Magellan 9500 Product Reference Manual

Standard 2 of 5 Check Character Calculation

NOTE
6-270
Enables/disables calculation and verification of an optional Standard 2 of
5 check character.
If check character calculation is disabled, the risk is increased that a mis-
read can occur. When disabled, any check character in a bar code is
treated as data character.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
STANDARD 2 of 5 CHECK CHARACTER CALCULATION = DISABLE
STANDARD 2 of 5 CHECK CHARACTER CALCULATION = ENABLE
®
Magellan 9500