Datalogic Magellan 9500 Product Reference Manual page 58

Figure 2-14. Physical Measurements: Remote Display (Short Base)
2-30
14.7 cm
Minimum
5.5"
(14.0 cm)
Maximum
11.75"
(29.8 cm)
3.375"
0.953 cm
31.6 cm
6. Cut the stalk to fit your installation (if required).
7. Route the cable through the base/stalk so that you can plug the con-
nector into the display head.
8. Remove the rubber band from the connector and attach the connec-
tor to the display head.
9. Slip the display head onto the stalk/base.
10. Feed the entire remaining length of the Remote Scale Display inter-
face cable through the cable routing hole so that the assembled
Remote Scale Display can be positioned over the mounting screw
holes.
5.8"
0.00
3.0"
lb
7.6 cm
4.5"
®
Magellan 9500