I 2 Of 5 Check Character Transmission - Datalogic Magellan 9500 Product Reference Manual

I 2 of 5 Check Character Transmission

NOTE
6-224
Enables/disables transmission of an optional Interleaved 2 of 5 check char-
acter.
This feature applies only when I 2 of 5 Check Character Calculation is
enabled. This item is ignored when the advanced feature, Full Label Edit, is
enabled.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
I 2 of 5 CHECK CHARACTER TRANSMISSION = DISABLE
I 2 of 5 CHECK CHARACTER TRANSMISSION = ENABLE
®
Magellan 9500