I 2 Of 5 Stitching - Datalogic Magellan 9500 Product Reference Manual

With smartsentry

Table of Contents

I 2 of 5 Stitching

Enables/disables stitching for I 2 of 5 labels. When parts of an I 2 of 5 bar

code are presented to the scanner with this feature enabled, the bar code

parts will be assembled by the scanner's software, and the data will be

decoded if all bar code proofing requirements are met.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan your selection from the bar codes below. You'll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

I 2 of 5 Stitching operates using fixed lengths ONLY. I 2 of 5 Fixed Length 1

and/or I 2 of 5 Fixed Length 2 must be properly configured for stitching to

I 2 OF 5 STITCHING = DISABLE

I 2 OF 5 STITCHING = ENABLE

Show Quick Links

Table of Contents