Disassembly and Assembly
3.3 C202 MAIN Board Assembly Removal
1. Remove 2 screws (CBS, 3x8, F/Zn) securing the C202 MAIN board assembly to the back of
the printer. (See Figure 3-3.)
2. Move C202 MAIN board about 5 cm (2") out from the back of the printer. (See Figure 3-3.)
CAUTION
C202 MAIN board assembly shield plate edges are sharp. So, be careful handling them.
Figure 3-3. C202 MAIN Board Assembly Removal
3-5
Rev. A