Cleaning The Platen Without A Grip Pad; Replacing Consumables; Replacing Ink Supply Units - Epson SC-F2200 Series User Manual

SC-F2200 Series User's Guide
Cleaning the Platen Without a
Grip Pad
If the platen without a grip pad is dirty, follow the
steps below to wipe off the dirt.
When printing on polyester T-shirts, the platen can
easily be soiled with ink due to the properties of the
fabric. If the platen is soiled with ink, wipe it off
quickly before it has a chance to dry.
A
Check that the platen is ejected forward.
Note:
If the platen does not move forward, press the
button to move it forward.
B
Turn off the printer and check that the
displayed screen disappears.
C
Use a soft, clean cloth to carefully remove any
dust or dirt.
If there is a serious dirt problem, clean it using
a soft, clean cloth dampened with water and a
small amount of detergent or ink cleaner and
wrung tight. Then wipe off moisture with a dry,
soft cloth.
Maintenance

Replacing Consumables

Replacing Ink Supply Units

Precautions When Replacing
Important:
Epson recommends the use of genuine Epson ink
supply units. Epson cannot guarantee the quality
or reliability of non-genuine ink. The use of
non-genuine ink may cause damage that is not
covered by Epson's warranties, and under certain
circumstances, may cause erratic printer behavior.
Information about non-genuine ink levels may
not be displayed, and use of non-genuine ink is
recorded for possibleuse in service support.
❏ If one of the installed ink supply units is
expended, printing cannot be performed.
Important:
When using WH ink, immediately replace the ink
supply unit with a new one if You need to replace
Ink supply unit. appears.
If the printer is left with the ink remaining alert
displayed, a print head or other part may be
damaged.
If ink is expended while printing, you can
continue printing after replacing the ink supply
unit. If you continue to use an ink supply unit that
is running low, you may need to replace the ink
supply unit while printing. If you replace it while
printing, colors may look different depending on
how the ink dries. If you want to avoid issues such
as this, we recommend replacing the supply unit
before printing. You can still use the removed ink
supply unit in the future until the ink supply unit
is expended.
The following procedure explains how to replace
ink supply units and cleaning ink supply unit.
❏ Insert all of the ink supply units into the ink trays.
Printing is not possible or a malfunction may
occur if even one of the ink trays does not contain
an ink supply unit.
85