Replacing Consumables; Other Maintenance - Epson ML-13000 User Manual

ML-13000 User's Manual
Item
Cleaning the Front Cover and
Maintenance Cover
Cleaning the Inside Light

Replacing Consumables

Item
Replacing the Ink Supply Unit
Disposing of Waste Ink
Replacing the Wiper Roll
Replacing the Flushing Pad
Replacing the Cleaning Pad
Replacing the Washing Scraper
Replacing the Sponge Roller
Replacing the Mist Filter

Other Maintenance

Item
Periodically Shaking the Ink Supply Units
Checking for Clogged Nozzles
Print Head Cleaning
Manually Capping the Print Head
Belt Cleaning Tank Flow Rate Adjustment
Adding Grease to the Scan Spindle
Adding Grease to the Belt Cleaning Unit
Removing ink film
Maintenance
Frequency
Everyda Every Every
y week month
Timing
When ink low warning is displayed on the control panel display
When a prepare and replacement message is displayed on the control panel
screen
When a prepare and replacement message is displayed on the control panel
screen
When the dirt does not come off even after cleaning
When the dirt does not come off even after cleaning
When a prepare and replacement message is displayed on the control panel
screen
When water droplets remain on the belt even after drying the sponge roller
When dirt does not come off even after cleaning the mist filter
Timing
When a shake message is displayed on the control panel screen
When checking if nozzles are clogged
When checking which colors are clogged
Horizontal stripes or tint unevenness (banding) have appeared
When a clog is found after checking for clogged nozzles
If capping is not performed for more than 20 minutes
When the belt dirt cannot be cleaned and stains the fabric
When drainage is insufficient and water overflows
Adding grease to the scan spindle: Once a month
Adding grease to the print head operating area: When a message prompting
you to add grease is displayed on the control panel screen (once a year)
When it is hard to pull out the belt cleaning unit
When the adhesive strength decreases about a week after applying the glue
157
Timing
Before turning on the power
Before turning on the power