Table of Contents
Advertisement
Additional Macintosh Information
The NIManage Utility
The Elite 21 Series Macintosh software includes a utility program called NIManage,
which can be used to control certain network settings for the printer. This utility will
only work with printers connected to the Macintosh network via AppleTalk, however.
Installing NIManage
NIManage is automatically installed onto the Macintosh as part of the initial Mac
software installation.The installer will place the NIManage utility in a folder called
GCC Elite 21 Folder on your hard drive.
Using NIManage
To start the NIManage utility, open the GCC Elite 21 Folder on your hard drive and
double-click the NIManage icon. This will bring up the "Select Printer" window. Click
your printer name from the list of available printers, then click Select.
This will select the printer and allow configuration changes to be made to the unit.
Clicking on the Printer Networking menu at the top of the screen will bring up the
following options:
2-28
(OS 9.x and earlier)
Advertisement
Table of Contents
