Table of Contents
Advertisement
• If the printer driver has not yet been installed for the printer, install it according to
the instructions in Chapter 4 of this manual, "Using the Elite 21 with Windows 95/98
and Windows ME."
• Click on the Start button. Select Settings and then Printers.
• Locate the icon for the Elite 21 printer that you have installed. Right-click on the
printer icon and select Properties.
• Click on the Details tab at the top of the Properties window. The following window
should appear:
• The new port that was created for the printer should appear at the top of the list of
available ports. Click on this port to select it from the list, then click OK to accept
the new setting. This will allow the PC to send jobs to the printer over TCP/IP.
Repeat this procedure on all PCs that are to use the printer over TCP/IP.
8-11
Advertisement
Table of Contents
