Table of Contents
Advertisement
Windows NT 4.0 Software Installation
1.
Go to the Start menu of Windows NT
4.0, then up to Settings and select
Printers. In the Printers window, double-
click the Add Printer icon to start the Add
Printer Wizard.
2.
The first window of the Add Printer
Wizard will ask if the printer is connected
to the local computer ("My Computer")
or to a Network Printer Server.
Select "My Computer" unless the printer
that you are selecting is attached to
another PC or accessed via an NT or
Win2000 server.
Note: If setting up the printer as a stand-
alone Ethernet network device, select "My
Computer" at this point and install the
driver as if the printer were connected to
the parallel (LPT1:) port of the PC. After
the installation, refer to the
4.0 section
in Chapter 8 of this Manual
(Networking the Elite 21 Series Printer) for
instructions on configuring the printer as a
network device.
Click Next.
Windows NT
6-3
Advertisement
Table of Contents
