Table of Contents
Advertisement
Offsetting Copies of Collated Output
The Elite 21 printer has the ability to sort collated documents by offsetting alternating
copies of the document as they are output from the printer. This makes it easier to
separate individual copies from each other, as each copy will be output slightly to the
side of the copies above or below it. This feature requires the use of the optional
Upper Output Bin accessory. Consult our web site at
www.gccprinters.com
for
information on ordering this accessory.
Once the Upper Output Bin is installed on the printer, offset output can be specified
when sending the print job, as follows:
Macintosh (all versions):
• Go to the File menu, then down to Print.
• In the Print dialog box, click on the "General" pull-down menu.
• Pull down to "Elite 21 Options."
• Under "Output Tray," select "Upper Bin - Offset."
• Send the print job as usual
Windows 95/98/ME:
• Go to the File menu, then down to Print.
• In the Print dialog box, click on the "Properties" button.
• Click on the "Paper" tab in the Properties window.
• Click on the "More Options..." button in the Paper window.
• Change the selection for"Output Bin" to "Upper Bin - Offset".
• Click OK to accept, then send the print job as usual.
Windows 2000/XP:
• Go to the File menu, then down to Print.
• In the Print dialog box, click on the "Layout" tab.
• Click on the "Advanced" button in the Layout window.
• Under "Printer Features," click on the link next to Output Bin. The link will become a pull-down
menu
• Change the selection to "Upper Bin - Offset".
• Click OK to accept, then send the print job as usual.
10-17
Advertisement
Table of Contents
