Table of Contents
Advertisement
The Page Setup Window contains the following options for selection:
Paper Size:
Paper Source: Specifies which paper tray the paper is to be drawn from. The options on the pull-
Orientation:
Margins:
After making all necessary selections in this window, click Finish to accept the settings and apply them
to the document.
5-12
Selects the Paper Size being printed to. This pull-down menu brings up a list of paper
sizes supported by the Elite 21 printer
Selects the page orientation, Portrait or Landscape, by clicking on the appropriate
radio button.
Selects left, right, top and bottom margins for the document.
down menu are as follows:
Automatically Select - Sends job to the tray on
the printer holding the paper size specified in the
document.
Envelope Feeder - Sends the job to the envelope
feeder. Greyed out unless the feeder is installed.
Manual Feed (Tray 1) - Sends the job to the Multi-
Purpose Feeder (Tray 1).
Tray 1 - Sends the job to the Multi-Purpose Feeder
(Tray 1) of the printer
Tray 2-4 - Sends the job to the standard lower paper
tray of the printer (Tray 2) or an additional lower
paper tray (Tray 3-4), if present.
Advertisement
Table of Contents
