Table of Contents
Advertisement
11-22
3.
Remove the duplexing unit of the printer
(if equipped) by pushing inward on the
green tabs to the left and right of the unit
(as shown). Grasp and pull the duplexing
unit out of the printer.
4.
If paper is jammed around the fusing unit,
lift up on the fuser release levers (#1 in
the diagram) and remove any jammed
paper from the fuser by pulling up and out
of the printer.
5.
Return the fuser release levers to their
original positions and reinsert the
duplexing unit (if equipped). Be sure to
latch the duplexing unit back into place by
sliding the two green tabs outward.
Advertisement
Table of Contents
