Table of Contents
Advertisement
Note: If you receive a message asking you to login to a server with Bindery
connections, the server you are attached to does not have Bindery Mode
enabled. Follow the procedures in Step 1 (Confirm Bindery Context) or log
onto a server with Bindery Services activated.
• From the Available Options screen, select Quick Setup and press the return
key. Use Quick Setup to connect your Print Server, Print Queue and Printer
correctly. You can modify these later if you need to.
• Select Print Server and press the N key to modify the entry.
• Enter the name of the print server in the Print Server field and press the
Return key.
Note:The print server name is printed under the Novell Network Information
on the printer's Network Status Page. The factory default name consists of
GCC, an underscore and a six-digit number (i.e. - GCC_123456).
• Press the ESC key to move to the New Printer field. Enter a name and press
the Return key.
• Press the ESC key to move to the New Print Queue field. Enter a name and
press the Return key.
• Press the ESC key to move to the Printer Type field and press the Return key.
From the list of printer types, select Other/Unknown and press the Return key.
• When you are finished, press the U key to save the configuration. Repeat these
steps for each file server that the printer server services.
• To view, add, delete, or modify print servers or queues after the initial setup,
access PCONSOLE again and select either the Print Queues or Print Servers
option on the Available Options screen.
8-32
Advertisement
Table of Contents
