Table of Contents
Advertisement
11-24
2.
Look for and remove paper jammed in the
space directly behind the rear cover.
Caution: The fusing unit of the printer
will be very hot directly after printing. Be
careful not to touch the fusing unit while
clearing any duplex unit jams.
3.
Remove the duplexing unit of the printer
by pushing inward on the green tabs to
the left and right of the unit (as shown).
Grasp and pull the duplexing unit out of
the printer.
4.
Press outwards on the tabs on the
duplexing unit (#1) to release its cover.
Lift up on the outside tabs (#2) to open
the cover.
Advertisement
Table of Contents
