Table of Contents
Advertisement
Configuring Printer Drivers for use of Additional Memory
Once the additional memory is installed, you will need to change settings within the driver software on
all of the computers that use the printer. This will allow the drivers to properly account for the amount
of installed RAM in the printer when sending print jobs. The drivers can be configured as follows:
Macintosh (except OS X*):
• Click once on the desktop printer icon for your printer to highlight it.
• Go to the Printing menu at the top of the screen, then down to "Change Setup..."
• In the Setup window, click on the "Change" pull-down menu and go down to "Memory Configuration."
• Change the setting in the "To:" pull-down menu to the correct memory amount for your printer.
• Click OK to accept the change.
*see OS X note on
Page 3-12
Windows 95/98/Me:
• Go to the Start menu, then to Settings and Printers.
• Right-click the printer icon for your Elite 21 printer and select Properties.
• Click on the Device Options tab.
• Under Installable Options, click on "VM Option."
• Under "Change Setting for:," change the selection to the correct memory amount for your printer.
• Click Apply and OK to accept the change.
Windows 2000/XP:
• Go to the Printers (Win2000) or Printers and Faxes (WinXP) window.
• Right-click the printer icon for your Elite 21 printer and select Properties.
• Click on the Device Settings tab, then scroll down to "Installable Options."
• Click on the link next to "Memory Configuration." This link will become a pull-down menu.
• Change the selection to the correct memory amount for your printer.
• Click Apply and OK to accept the change.
Windows NT 4.0:
• Go to the Start menu, then to Settings and Printers.
• Right-click the printer icon for your Elite 21 printer and select Properties.
• Click on the Device Settings tab, then scroll down to Installable Options.
• Click on "Memory Configuration" from the list of options.
• Under the "Change Setting to:" box, change the selection to the correct memory amount for your
printer.
• Click Apply and OK to accept the change.
1-39
Advertisement
Table of Contents
