Table of Contents
Advertisement
Field
Enable NetWare Print
Server
Print Server Name
Print Queue Scan Rate
Print Server Password
and Print Server
Password Retype
Ethernet Frame Type
Enable NDS Mode
Description
Indicates whether the NetWare printer has
been enabled.
If the box is not checked, the printer has not been
enabled for NetWare. All other fields on the screen will
be shaded.
If the box is checked, the printer has been enabled for
NetWare and you can make entries in the other fields.
Indicates the NetWare print server name which the
printer uses to log into NetWare. You can enter a name
which does not already exist in the network directory or
server bindery.
The maximum field length is 48 characters.
Specifies the rate at which a printer will poll print queues
for a new print job. For example, if you place 1 in the
field, the printer should poll for new print jobs every 1
second.
The minimum value for this field is 1 and the maximum is
250.
Indicates the password for a printer
which will be used to log into NetWare.
When you change this field, NWSetup will set the
password in both NetWare and the printer.
The maximum length for this field is 32 characters.
Both the Password and Password Retype fields must be
identical before a user is allowed to Finish this screen.
Indicates the Ethernet frame type that should be used by
the NetWare protocol stack by default. Only one frame
type can be selected.
Indicates whether the printer support Directory
Services. When the box is checked, Directory Services is
supported.
If this box is not checked, then all other fields on this
screen will not be enabled.
8-21
Advertisement
Table of Contents
