The Protocols category contains the following items:
•Setup NetWare - Brings up the following window:
This section allows NetWare settings to be selected for the printer. Enter any
applicable settings for your NetWare network and click Accept Settings. The
printer may require a restart for some settings to take effect.
•Setup TCP/IP - Allows the settings found in the TCP/IP section of the
Input/Output menu to be modified. This section also allows for DHCP support
to be enabled or disabled on the printer.
•Setup AppleTalk - Allows AppleTalk to be enabled or disabled and an AppleTalk
Zone to be assigned to the printer (if using logical zones).
9-8