Table of Contents
Advertisement
Field
Preferred NDS Context
Preferred NDS Tree
Enable Bindery Mode
Primary File Server
3. Print Server Settings
NWSetup lets you set up each Print Server printer. This information is usually entered
using NetWare's NWADMIN or PCONSOLE utility. NWSetup eliminates the need
for configuring your printer printer through any NetWare utility. A description of
each setting follows.
Field
Enable Printer
Printer Name
8-22
Description
Enter a text string to set the NDS directory context for
which the printer will use to login to the network.
The maximum field length is 128 characters.
NOTE: Make sure you enter the whole context, whether
typed or typeless.
Enter a text string to set the NDS tree which the printer
will use to login.
The maximum field length is 48 characters.
Determines whether the printer should attempt to
service the NetWare newtork in bindery mode.
If this box is checked, then Bindery Mode is enabled.
NOTE: If this field is not enabled, then the Primary File
Server field will not be enabled.
Specifies which NetWare file server that the printer
should use as the primary file server. If no primary file
server has been selected yet, or if a server that is not
available is selected, then the first file server in the list is
selected.
Description
Indicate whether support for the printer and printer is
enabled.
If this box is checked, then the printer is enabled.
If the box is not checked, then the printer is not enabled.
The remaining fields on the screen will not be enabled.
Displays the name of the printer. This is a read-only field.
Advertisement
Table of Contents
