Table of Contents
Advertisement
Setting Up an AS/400 Systems to Use lpd/lpr
When working with the output queue description (WORKOUTQD), there are several
fields that must be defined for the printer to function properly as a remote printer
device. Use the following procedures to do this:
• When prompted for the remote system, type INTNETADR so the AS/400
recognizes the device as an IP device.
• Type PORT1.
• Connection type must be IP.
• Internet address must be the IP address of the printer.
• Destination type must be OTHER.
• When prompted for transforming SCS to ASCII, type YES to allow the AS/400 do
the character translation.
• Manufacturer type and model must be the print driver that goes with your
printer.
8-44
Advertisement
Table of Contents
