Setting Defaults Using Driver Properties
Typically, changes made within the Page Setup, Print or Print Properties dialog windows will only take
effect for the particular document that you are printing. Changes to the default settings used by the
driver are made from the Driver Properties section of Windows 95/98 and Windows ME.
To access these settings, go to the Start menu in Windows 95/98/ME, go up to Settings and select
Printers. Locate the icon for the Elite 21 printer, then right-click the icon and go to Properties. The
following window will appear:
The tabs at the top of the Properties window allow different categories of settings to be accessed. The
General tab identifies the printer name and allows Comment information about the printer to be
entered. This information is helpful in locating the printer over a network. This window also allows a
test page to be sent to the printer.
4-24