GCC Technologies Elite 21DN User Manual page 212

Hide thumbs Also See for Elite 21DN:
Table of Contents

Advertisement

6. If the Print Server is to be operated under Novell Directory Services, type in a
Context entry and Preferred NDS Tree entry in the appropriate fields. Be sure to
give the whole context, whether typed or typeless, and do not begin your context
path with a trailing period (.). If you don't know your tree, type: whoami at the
DOS command line. A typed context name example is:
ou=standard.ou=organization_1
7. In the default mode, the Print Server scans each queue which it is to service once
per second. If you prefer a longer scan rate, you may enter the time between
scans in seconds in the Print Queue Scan Rate field.
8. The printer will normally monitor the network to determine which frame type is
being used for Novell. When it recognizes a type, it will assume the same frame
type. Once it selects a frame type, the Print Server Card will only operate over
that Novell frame type. Monitoring normally starts looking for IEEE 802.3, then
Ethernet II, then 802.3 SNAP, etc. If your network is using multiple frame types for
Novell, you should bias the frame search to the desired type by setting the button
next to the designation under Ethernet Frame Type.
9. You can Disable Bindery mode on the Print Server if the printer is to be used in
NDS mode only. To do so, click on the Disable Bindery Mode box. If you disable
Bindery, the Print Server Card will not support Print Servers on a Bindery file
server.
10.Once you have selected all desired settings and entered the desired NetWare
information, you may cause this information to be entered in the printer by clicking
on Accept Settings. As with all value changes, you must enter the WebAdmin
password in the appropriate space before clicking on Accept Settings. The default
WebAdmin password as shipped is "sysadm."
11.Entered values do not take effect until the printer is reset or power cycled. You
may reset from WebAdmin by returning to the Network page and clicking on
Reset under System. Now click on Reset Unit. Alternatively, you may power cycle
the printer. The new NetWare values should now be in effect.
8-37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elite 21nElite 21 seriesElite 21dn+Elite 21n+

Table of Contents