Table of Contents
Advertisement
11-8
6.
Position the new BTR roller with the gear
on the right side. Insert the left side of
the shaft into the printer first, then the
right.
Make sure the shaft is seated securely into
the notches inside the printer.
7.
Press down on both ends of the BTR
roller until it locks into place.
8.
Reinsert the toner cartridge into the
printer, making sure the tabs on the left
and right of the cartridge match up with
the channels within the printer (as
shown).
Make sure the cartridge is inserted all the
way into the printer and is seated
properly.
Advertisement
Table of Contents
