Table of Contents
Advertisement
Paper Source: Specifies which paper tray the paper is to be drawn from. The
Auto Select - Sends job to the tray on the printer holding the paper size specified in the document.
Envelope Feeder - Sends the job to the envelope feeder. Greyed out unless the feeder is installed.
Manual Feed - Sends the job to the Multi-Purpose Feeder (Tray 1).
Tray 1 - Sends the job to the Multi-Purpose Feeder (Tray 1) of the printer
Tray 2-4 - Sends the job to the standard lower paper tray of the printer (Tray 2) or an additional
lower paper tray (Tray 3-4), if present.
Copy Count:
Orientation:
Print on
Both Sides:
Clicking on the Advanced tab brings up additional printer options, shown on the next page. Many of
these options are duplicated from the Page Setup and/or Print windows and can be set here, or in those
windows. Options which can only be set from this section include the following:
Resolution:
Scaling:
TrueType
Font:
Mirrored
Output:
Negative
Output:
6-12
options on the pull-down menu are as follows:
Selects the number of copies of the document to be printed.
Selects the page orientation, Portrait, Landscape or Rotated, by clicking on the
appropriate radio button.
Controls double-sided (duplex) printing if your printer is equipped with the
optional Duplex Printing Unit. To enable duplexing, click the appropriate binding
method (Short Side or Long Side). The printer will automatically print the double-sided
pages accordingly.
Selects the resolution of the print job, 600 or 1200dpi.
Selects page scaling for the document. This value can be set to between 25% and
400%.
Sets whether TrueType fonts are substituted with equivalent resident fonts
in the printer, or downloaded with the print job.
Prints job as mirror image
Reverses black and white in the document.
Advertisement
Table of Contents
