Table of Contents
Advertisement
The following can be selected in this window:
Collation in
Sets whether job collation is handled by the printer or by the computer.
Printer:
This setting should match the Collation Mode setting on the printer's Configuration
menu.
To change these settings, click on the item you wish to change on the list at the top of the window. The
lower window will then allow you to change the options for the particular feature you have selected.
Click Apply and OK when making any changes.
The fourth tab in the Properties window brings up the PostScript window. This window allows the
PostScript Output Format to be changed. We recommend using the "PostScript (Optimized for Speed)"
setting. If errors occur with your documents, try switching to "PostScript (Optimize for Portability -
ADSC)" setting.
Once all Properties options are properly set, click OK to return to the Print dialog window. Click OK
to send the job to the printer.
4-23
Advertisement
Table of Contents
