Table of Contents
Advertisement
Configuring Printer Drivers for use of the Duplex Unit
Once the Duplex Unit is installed, you will need to change settings within the driver software on all of
the computers that use the printer. This will allow the Duplex Unit to show up as an option when
sending your print jobs. The drivers can be configured as follows:
Macintosh (except OS X*):
• Click once on the desktop printer icon for your printer to highlight it.
• Go to the Printing menu at the top of the screen, then down to "Change Setup..."
• In the Setup window, click on the "Change" pull-down menu and go down to "Duplex Unit."
• Change the setting in the "To:" pull-down menu to "Installed."
• Click OK to accept the change.
Windows 95/98/Me:
• Go to the Start menu, then to Settings and Printers.
• Right-click the printer icon for your Elite 21 printer and select Properties.
• Click on the Device Options tab.
• Under Installable Options, click on "Duplex Unit."
• Under "Change Setting for:," change the selection to "Installed."
• Click Apply and OK to accept the change.
Windows 2000/XP:
• Go to the Printers (Win2000) or Printers and Faxes (WinXP) window.
• Right-click the printer icon for your Elite 21 printer and select Properties.
• Click on the Device Settings tab, then scroll down to Installable Options.
• Click on the link next to "Duplex Unit" that says "Not Installed." This link will become a pull-down
menu.
• Change the selection to "Installed."
• Click Apply and OK to accept the change.
Windows NT 4.0:
• Go to the Start menu, then to Settings and Printers.
• Right-click the printer icon for your Elite 21 printer and select Properties.
• Click on the Device Settings tab, then scroll down to Installable Options.
• Click on "Duplex Unit" from the list of options.
• Under the "Change Setting to:" box, change the selection to "Installed."
• Click Apply and OK to accept the change.
1-28
*see OS X note on
Page 3-12
Advertisement
Table of Contents
