Table of Contents
Advertisement
Windows 2000/XP Software Installation -
5-6
Using the Add Printer Wizard
1.
Go to the Start menu of Windows. In
Win2000, go to Settings and select Printers.
In WinXP, go to Printers and Faxes. In the
Printers window, double-click the Add
Printer icon (Win2000) or click the Add a
Printer icon (WinXP) to start the Add
Printer Wizard.
Click "Next" at the Add Printer Wizard
welcome screen.
2.
The next window of the Add Printer Wizard
will ask if the printer is connected to the
local computer or to a Network Printer
Server.
Select "Local Printer" unless the printer that
you are selecting is attached to another PC
or accessed via an NT or 2000 server. De-
select the box marked "Automatically detect
and install my Plug and Play printer." Click
Next.
Note: If setting up the printer as a stand-
alone Ethernet network device, select "Local
Printer" at this point and install the driver
as if the printer were connected to the
parallel (LPT1:) port of the PC. After the
installation, refer to the
section
of Chapter 8 of this Manual
(Networking the Elite 21 Series Printer) for
instructions on configuring the printer as a
network device.
Windows 2000/XP
Advertisement
Table of Contents
