GCC Technologies Elite 21DN User Manual page 59

6. The Setup process will continue. A status
bar will show the progress of the setup.
7. A window will appear asking for any
options on the printer to be configured.
The first page of options sets the Memory
Configuration, Additional Trays, Envelope
Feeder and Upper Bin status. Set these
items using the pull-down menus and then
click on the "Options Installed 1" pull-
down menu. Pull down to "Options
Installed 2."
8. The second window of options contains
settings for Duplex Unit, Collation Mode
and Paper Sizes. Set these items using the
pull-down menus, then click OK to
continue.
2-9