Table of Contents
Advertisement
Macintosh (Except OS X*):
• Click once on the desktop printer icon for your printer to highlight it.
• Go to the Printing menu at the top of the screen, then down to "Change Setup..."
• In the Setup window, click on the "Change" pull-down menu and go down to "Collation Mode."
• Change the setting in the "To:" pull-down menu to "Transmit Once/Image Once."
• Click OK to accept the change.
*see OS X note on
Page 3-12
Windows 95/98/ME:
• Go to the Start menu, then to Settings and Printers.
• Right-click the printer icon for your Elite 21 printer and select Properties.
• Click on the Device Options tab.
• Under Printer Features, click on "Collation in Printer."
• Under "Change Setting for:," change the selection to "Transmit Once/Image Once."
• Click Apply and OK to accept the change.
Windows 2000/XP:
• Go to the Printers (Win2000) or Printers and Faxes (WinXP) window.
• Right-click the printer icon for your Elite 21 printer and select Properties.
• Click on the Device Settings tab, then scroll down to Installable Options.
• Click on the link next to Collation Mode that says "Disabled." This link will become a pull-down
menu.
• Change the selection to "Transmit Once/Image Once."
• Click Apply and OK to accept the change.
Windows NT 4.0:
• Go to the Start menu, then to Settings and Printers.
• Right-click the printer icon for your Elite 21 printer and select Properties.
• Click on the Device Settings tab, then scroll down to Installable Options.
• Click on "Collation Mode" from the list of options.
• Under the "Change Setting to:" box, change the selection to "Transmit Once/Image Once."
• Click Apply and OK to accept the change.
10-16
Advertisement
Table of Contents
