Table of Contents
Advertisement
Step 8. Attach Power Cord
1-16
1.
Insert the power cord into the AC power
connector on the back of the printer as
shown.
2.
Check the power switch at the front of
the printer to confirm that it is in the Off
(O) position.
3.
Plug the power cord into a grounded wall
outlet or power strip.
4.
Switch the power switch to the On (I)
position. After the printer warms up, the
"Ready" message should be visible on the
control panel's LCD display and the Ready
light will remain on.
Advertisement
Table of Contents
