Edge-to-Edge Pringing Software Installation
Instructions for both Mac OS 9.x/earlier and Mac OS X
10-20
1.
Make sure the printer software has been
installed onto your Mac system following
the instructions in Chapter 2 (Mac OS 9.x
or earlier) or Chapter 3 (Mac OS X).
2.
Insert the Elite 21 Series CD into the
computer and double-click the "Elite 21
Installer" icon.
3.
Click "Continue" to proceed past the
introduction screen, then click "Accept" at
the software license screen.
4.
An Easy Install window will appear. Click
on the "Easy Install" pull-down menu and
pull down to "Custom Install."
5.
The Custom Install window will appear.
Check the box next to the "Elite 21 Series
Edge-to-edge PPD Files" option, then click
"Install."