Table of Contents
Advertisement
4 Configuring the Notify Settings
The Notify Settings screen appears when you double-click on an entry in the
Users/Groups Notified by Printer field on the Print Server screen. Use this screen to
set up the notify function for the users or groups.
Note:The printer supports the Notify function only in Bindery mode
Below is a description of each field:
Field
User/Group name
Delay in minutes for
first message
Delay in minutes for
repeat messages
Description
Indicates the name of the user or group which is being
edited. This field cannot be changed.
Indicates how long the printer should wait
before sending a notification message to the user that an
error condition has occurred. The field is set to 5
minutes by default but can be set to any value between 1
to 60 minutes.
Indicates how long the printer
should wait before sending a repeat notification message
to a user or group when an error condition has
occurred. The field is set to 30 minutes by default but
can be set to any value between 1 to 60 minutes.
8-27
Advertisement
Table of Contents
