Table of Contents
Advertisement
Auto Select - Sends job to the tray on the printer holding the paper size specified in the document.
Envelope Feeder - Sends the job to the envelope feeder. Greyed out unless the feeder is installed.
Manual Feed - Sends the job to the Multi-Purpose Feeder (Tray 1).
Tray 1 - Sends the job to the Multi-Purpose Feeder (Tray 1) of the printer
Tray 2-4 - Sends the job to the standard lower paper tray of the printer (Tray 2) or an additional
lower paper tray (Tray 3-4), if present.
Copies:
Note that some of these options are duplicated from the Page Setup window. Changing these settings
in the Properties window will make the new settings the default for the printer until they are changed
again.
Clicking on More Options brings up additional printer options, as follows:
Print on Both Sides controls double-sided (duplex) printing if your printer is equipped with the
optional Duplex Printing Unit. To enable duplexing, click "Print on Both Sides" and select the
appropriate binding method (long edge or short edge). The printer will automatically print the double-
sided pages accordingly.
Paper Type defines the type of paper being used. Options include plain, letterhead, prepunched, bond,
color, rough, preprinted, transparency, labels, recycled, card stock, normal 1, 2 and 3 and thick 1 and 2. If
you have assigned a particular paper type to a tray through the printer's Paper Handling menu, selecting
that type from this window will automatically direct output to the correct tray.
Output Bin determines where the paper will be output from the printer. The selections for Output
Bin are:
4-20
Selects the number of copies of the document to be printed.
Advertisement
Table of Contents
