Table of Contents
Advertisement
Paper Source: Specifies which paper tray the paper is to be drawn from. The options on the pull-
down menu are as follows:
Auto Select - Sends job to the tray on the printer holding the paper size specified in the document.
Envelope Feeder - Sends the job to the envelope feeder. Greyed out unless the feeder is installed.
Manual Feed - Sends the job to the Multi-Purpose Feeder (Tray 1).
Tray 1 - Sends the job to the Multi-Purpose Feeder (Tray 1) of the printer
Tray 2-4 - Sends the job to the standard lower paper tray of the printer (Tray 2) or an additional
lower paper tray (Tray 3-4), if present.
Media
Defines the type of paper being used. Options include plain paper, prepunched,
letterhead, transparencies and labels. If a Paper Type has been defined for one or
more of the printer's trays (using the front panel of the printer), this selection can be
used to send the job to the appropriate tray. For example, if Tray 2 has been specified
as "Letterhead," selecting "Letterhead" from this list will direct output to Tray 2
automatically.
5-17
Advertisement
Table of Contents
