Table of Contents
Advertisement
Installing NWSetup
NWSetup can be installed from the Elite 21 Series CD-ROM as follows:
• Insert the Elite 21 Series CD-ROM into the PC.
• Open the "My Computer" icon from the desktop, and double-click the CD-ROM
icon to open the CD window.
• Double-click the Network folder on the Elite 21 Series CD-ROM, then double-
click the NWSetup folder, then the file called "SETUP.EXE" within this folder.
• This will run the NWSetup installer. Follow the steps in the installer to install the
software.
Running NWSetup
When you install NWSetup, a program icon is placed on your desktop. Click on the
NWSetup icon to start the program.
Note: If you are configuring for NDS (Directory Services), make sure you are logged
into the correct tree and context before running NWSetup.
Using the NWSetup Program
1. Select a Print Server
NWSetup displays a list of all printers available on your network after you initiate the
program. The printer appears with its serial number. Once you select the printer you
want to configure, the Print Server Settings screen appears. This screen lets you set
up your version of Novell NetWare for the printer.
2. Setup Novell NetWare
The Print Server Settings are shown below. There are two Print Server Settings
screens, which you need to complete to configure the printer for Novell NetWare.
Each screen lets you set up your version of Novell NetWare for the printer, including
directory and bindery services.
8-20
Advertisement
Table of Contents
