Table of Contents
Advertisement
Setting Up an AIX 4.0 System
Use the following procedures to install a printer in an AIX 4.0 system:
• Run SMIT Printer.
• Select Print Spooling.
• Select Add a Print Queue.
• Select Remote.
• Use Standard Processing.
• Assign a queue name.
• Use the host address of the printer for the Remote System.
• Use PORT1 for the queue on the remote system.
• Add a description (optional).
• Press [Enter] to generate.
Installation is complete. Test your printer by executing the following command:
lp -d<queue_name> <file_name>
8-42
Advertisement
Table of Contents
