2: Using A Macintosh; Software Installation - GCC Technologies Elite XL-20/600 User Manual

2: Using a Macintosh

Software Installation

Software for the Macintosh is included on the Elite XL 20ppm CD-ROM provided
with your printer. The installer places all the printing software into the appropriate
locations on your startup disk (the startup disk is the hard disk that contains the
System and Finder files used to start your Macintosh).
To install the Elite XL 20ppm software:
1.
2.
3.
4.
5.
If you want to install all the
files for your 20ppm model
(recommended), choose the
model name and click the
Install button.
If you want to install certain
files, scroll through the list
and click on those files. You
can select more than one
file by holding down the
Shift key as you click on the
line. When you have
selected all the files you
want to install, click the
Install button.
2 - 2 • Using the Macintosh
Put the Elite XL 20ppm CD-ROM into the CD-ROM drive.
Open the folder labeled "Printing Software."
Double-click the Elite XL 20ppm Installer icon.
Click Continue. You will see the Read Me file. Take some time to read this
file. It contains last-minute information on the installation procedure, as
well as updates on Elite XL 20ppm features and compatibility issues. After
reading the Read Me file, you can print it (if a printer is available) or save
it as a SimpleText document.
Click Continue. You will see the Install dialog box. Choose the file(s) you
want to install.