Table of Contents
Advertisement
Setting Up an AIX Version 2.5 Remote Printer to Use lpd/lpr
Set up a remote printer on the host that sends jobs to the Elite 21 using the printer's
lpd. Use the following procedures to do this:
• At the prompt, type:
#smit spooler <cr>
• When a window appears, select Manage Remote Printers.
• When a menu appears, select Client Services.
• Another menu appears, select Remote Printer Queues.
• Another menu appears, select Add a Remote Queue.
• When a window appears, change the values shown to configure the printer. The
values displayed are default values. You must replace the short and long form
filter values with the values shown below.
Input Requested
Name of queue to add
Queue Destination Host
Short Form Filter
Long Form Filter
Name of remote print queue
Name of device to add
After you have supplied all values, press Enter. You can now print.
Example
print1
printfast
/usr/lpd/bsdshort
/usr/lpd/bsdlong
PORT1
print1
Description of Input Data
Name of local printer
Printer IP hostname
Required value
Required value
Printer
Name of local queue
8-41
Advertisement
Table of Contents
