Table of Contents
Advertisement
• A summary page will appear showing all the settings that were made within the Add
TCP/IP Port Wizard. Double-check these settings and click Finish.
• The Printer Ports window will re-appear, click Close. Under the Ports tab, the
newly created TCP/IP port will be displayed and selected (listed by its Port Name
as entered in the TCP/IP Port Wizard).
• Click Apply to accept the assignment of the printer to the new TCP/IP port.
This will allow the Windows 2000/XP PC to print to the Elite 21 over TCP/IP.
Selecting a Shared Printer
This section briefly describes the steps for setting up client access to a shared printer.
This will allow other PCs on the network to print to the printer over the Windows
2000 server.
Windows 95/98/ME:
In the Printer Properties on the Details tab. Click the Add Port button and browse
the network for the shared printer. Look for the Share Name that was selected when
setting up the printer on the Win2000 server.
Windows 2000/XP/NT 4.0:
Add a new printer (with Add Printer), select "Network Printer Server" rather than My
Computer and choose the shared printer from the shared printers list. Look for the
Share Name that was selected when setting up the printer on the Win2000 server.
8-15
Advertisement
Table of Contents
