Table of Contents
Advertisement
Fine-Tuning Page Alignment
Due to variances between printer engines, some users printing edge-to-edge jobs may
notice a small amount of misalignment between the printed image and the edge of the
page. This would appear as a small amount of unprinted white space at the edge of
the page. In these cases, the printer can be adjusted to shift the image up, down, left
or right to better align with the page. To shift the image location on the page, follow
these steps:
To shift the image up or down:
• Make sure the printer's display is reading "Ready".
• Press either Menu key until "Printing" appears.
• Press either Item key until "Vertical Shift" appears.
• Press the top Value key to shift the image up or the bottom Value key to shift the
image down. The image can be shifted in intervals of 1 point (1/72", 0.35mm) to
a maximum of 9 point (1/8", 3.175mm).
• Press the Select key to accept the new setting.
To shift the image left or right:
• Make sure the printer's display is reading "Ready".
• Press either Menu key until "Printing" appears.
• Press either Item key until "Horizontal Shift" appears.
• Press the top Value key to shift the image left or the bottom Value key to shift the
image right. The image can be shifted in intervals of 1 point (1/72", 0.35mm) to a
maximum of 9 point (1/8", 3.175mm).
• Press the Select key to accept the new setting.
10-22
Advertisement
Table of Contents
