Replacing the BTR Roller
The Backup Transfer Roller (BTR) is used for transferring toner onto the paper. It should be replaced after
approximately 200,000 sheets have been printed. Depending on operating conditions, however, the roller
may need to be replaced before or after that interval is reached. Instructions for replacement of the BTR
Roller are as follows:
11-6
1.
Check the printer's display to make sure
the unit is in the Ready mode.
Switch off the printer's power switch at
the front of the unit and unplug the
printer's AC power supply from its outlet.
2.
Open the front cover of the printer.