Table of Contents
Advertisement
Step 11. Verify Printer Setup
In order to verify that the printer has been set up properly, we recommend sending a simple print job
from the computer to the printer. To do this, make sure that the Elite 21 printer is selected as the
default printer on your computer, as follows:
Macintosh (OS 9.x or earlier): Single-click the printer's icon on the Desktop. Go to the Printing menu,
then down to "Set Default Printer."
Macintosh (OS X): Double-click the "Print Center" icon, found within the Utilities folder inside the
Applications folder. Click on the name of your printer from the list that appears. Go to the Printers
menu, then down to "Make Default."
Windows (except XP): Go to Start, then Settings, then Printers. Right-click the icon for the printer.
Select "Set as Default" from the list.
Windows XP: Go to Start, then Printers and Faxes. Right-click the icon for the printer. Select "Set as
Default Printer" from the list.
Note:This option only appears on the list if the printer is not already the default printer.
Once the printer is selected, open an application on the computer (such as SimpleText on the Mac or
NotePad in Windows) and create a simple file. Go to File and then to Print to print the job.
If the job prints, installation is complete.
If the job fails to print, confirm that Steps 1-10 in this manual have been performed correctly. If the
printer still will not print, repeat Steps 1 -10. If you still have difficulty getting a document to print,
contact GCC Technical Support by phone at (781) 276-8620 (North America only; outside North
America, refer to
dealer.
1-40
Appendix
I) or
http://www.gccprinters.com/support
or contact your authorized GCC
Advertisement
Table of Contents
