Table of Contents
Advertisement
Windows NT 4.0:
• Open the document you wish to print. Go to the File menu and then down to Print.
• Click on the Properties button in the Print window.
• Click the "Page Setup" tab in the Properties window.
• Set "Print on Both Sides" from None to the correct binding method (long edge or short edge).
• Click OK to accept and return to the Print window. Set any other print options for the job to the
desired settings, and click OK to send the job.
Note: During the duplex printing process, the edge of the page may briefly appear
from out of the output slot at the top of the printer, then be pulled back into the
printer. This is normal operation. Do not attempt to remove sheets from the printer
until they have been fully ejected from the printer.
10-3
Advertisement
Table of Contents
