The Laserpro Spirit Series Print Driver; Page Setup And Orientation - GCC Technologies LaserPro Spirit Series User Manual

5.2 The LaserPro Spirit Series Print Driver

With the LaserPro Spirit Series print driver successfully installed, you will need to adjust the printer
and page size default settings before you can begin editing and completing jobs. By doing so, you will
be setting the work area in your graphics software to match the work table area.
NOTE
Please make sure the LaserPro Spirit Series is set to the default printer before
proceeding to the page and layout setup.
Ensure that the LaserPro Spirit Series has been selected as the DEFAULT PRINTER. You can do so
by going into your Windows Control Panel → Printers and Faxes. If the LaserPro Spirit Series is not
selected as DEFAULT PRINTER, you may set it up through the graphics software as well. The
following example takes CorelDRAW to demonstrate how to set up LaserPro Spirit Series as the
Printer
1) From the primary menu, click FILE → PRINT SETUP.
2) From the navigation bar Name, click Spirit Series → OK

5.2.1 Page Setup and Orientation

The first thing you must do before working with the LaserPro Spirit Series Print Driver will be to
make sure the page and layout settings are properly configured within your graphics software.
You will need to access and edit the Page Setup or Layout page of your graphics software to
set your graphics software's page layout to match the LaserPro Spirit Series' work table's
dimensions and orientation.
From your graphic software's Page Setup page:
• Set the page orientation in the graphics software to Landscape mode.
• Set page size to match laser machine work area size.
Spirit and Spirit LS: 640x460 mm (25.19"x18.11") or 740x460 mm (29.13"x18.11") with
extended mode
Spirit GLS: 860x610 mm (33.8"x20") or 960x610 mm (37.79"x20") with extended mode
109 232001290G(13)