Removing The Holding Tray Y Motor - Canon NP6045 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
5) Remove the two mounting screws
J202, J203, J204, J205, J207, J208, J209, J210); then, remove the holding tray
driver PCB .

7. Removing the Holding Tray Y Motor

1) Slide out the holding tray assembly to the front, and remove the copier.
2) Turn over the holding tray assembly.
3) Remove the two mounting screws
5-90
COPYRIGHT © 1997 CANON INC.
, and disconnect the nine connectors
Figure 5-871
, and remove the right rail
Figure 5-872
CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
(J201,
.