CHAPTER 5 MECHANICAL SYSTEM
2.6.9 Removing the Registration Roller Unit
1) Remove the image processor PCB. (See
2.2.1)
2) Using long nose pliers or the like, pick
the hook [1], and detach the registration
roller gear [2].
When removing the gear,
be sure to take care not to
break the claw.
3) Slide the reader unit, and open the car-
tridge cover.
4) Remove the 6 screws [3], and detach the
registration roller unit [4].
5-54
COPYRIGHT © 2002 CANON INC.
[3]
2000 2000 2000 2000
CANON iR1200/iR1300 Series REV. 0 AUG. 2002
[1]
[2]
F05-206-21
[4]
F05-206-22
[3]